Card Reader - telekom behnke myintercom Plus Anleitung

Instructions myintercom Plus IP video door intercom
GB

Card reader

card reader
5.
It is possible to obtain the myintercom plus IP
video door intercom system with an integrated
card reader. This card reader may be used to
implement an easy form of access control by
providing an RFID card registered with your door
intercom to every authorized person. By holding
the registered card to the card reader, relay 1
and the open door function will be triggered.
Overview display
Displays the 10s of the current
memory position (
; ; ... )
1.2 1.3 9.9
Displays the 1s of the current
memory position (from
This decimal point marks the 100s position.
Starting at position 100 the decimal point to
the left appears (e.g. "
memory positions from 0 to 99, this decimal
point will not appear. (e.g. "
This decimal point indicates if the selected
memory position is currently in use.
(e.g. " " : memory position 138 is
3.8.
occupied by a transponder).
60
; ; ; ... ; ;
10 20 30 90 1.1
to )
0 9
" for 153). For
5.3
" for 53)
5 3
Changes are possible when the display is
flashing.
Other operation displays:
The transponder in this area has not been
programmed yet.
Malfunction!
The card reader does not work properly; internal
error. Please send in your door intercom to have
it repaired.
www.behnke-online.com