telekom behnke myintercom Plus Anleitung Seite 45

System requirements
The following minimum requirements must
be met to use the myintercom IP video door
intercom station:
▸ For the 2-core installation: 2-core telecommu-
nication cable
▸
For the Ethernet installation: PoE (IEEE 802.
af-2003 or later) supplied Cat5 Ethernet cable
▸
Free network port on your switch / router
▸
WiFi
▸ The myintercom app from Apple's App Store
or from Google Play
▸
DHCP server providing an IP address, a
subnet mask, a gateway and a DNS server
(standard)
▸
Option: In case you want to use your door
intercom remotely, i.e. not from within your
local WiFi-network but on the go via the
internet, you need: A broadband internet
connection (without proxy / SOCKS server)
from your provider, e.g. DSL 2000 or faster.
Unlimited data is recommended. Your
door intercom needs to establish a direct
connection to the internet (without proxy /
SOCKS server).
▸
iOS 5 or later – iPhone 5S, iPhone 5, iPad with
an activated Apple-ID to download the app
free of charge
▸ Android 4 or later – smartphones and tablets
(with at least a dual core processor 2 x 1.2 GHz
or faster) and activated Google Play account
to download the app free of charge
www.behnke-online.com
Instructions myintercom Plus IP video door intercom
Please note: Keep the supplement sheet
"Initialisation" in a safe place. Without the
access information provided on this sheet,
changes to your configurations will be
impossible at a later stage.
GB
Introduction
45