Mounting The Door Intercom - telekom behnke myintercom Plus Anleitung

Instructions myintercom Plus IP video door intercom
GB
Set up

2.4. Mounting the door intercom

Prepare on-wall housing for cable inlet
Insert the door intercom into the housing and fix
the four screws to the on-wall housing.
Then mount the screw covers - done!
The example shows the on-wall mounting. The
door intercom can also be flush-mounted. To
do so, the corresponding flush housing will be
mounted into the wall opening or the wall cavity
cutout, and the door intercom will be fixed as
shown.
48
Mount the housing and connect the door intercom
www.behnke-online.com