telekom behnke myintercom Plus Anleitung Seite 53

Gong connections
Potential-free connection for up to three door
gongs (maximum load 30 V DC / max. 1 A or
125 V AC / max. 0.5 A), to be activated when the
button is pressed. Cf. chapter "3.3. Open door/
Relay/Gong" on page 55.
Gong switch
The gong switch allows you to set the number
of gong sounds to be played upon pressing the
button. Cf. chapter "3.4. Set a door gong" on
page 56.
Tamper contact
Cf. chapter "1.2. General Information" on
page 44.
Supply socket for the safety relay
Cf. chapter "4.1. Safety relay" on page 57.
Connection socket for the safety relay
Cf. chapter "4.1. Safety relay" on page 57.
Connection for button controlling the open
door function
Cf. chapter "3.3. Open door/Relay/Gong" on
page 55.
www.behnke-online.com
Instructions myintercom Plus IP video door intercom
Door intercom electronics with two-core tech-
nology.
Connection socket for coaxial cable
Possible data transmission and power supply
for the myintercom plus video door intercom.
Cf. chapter "3.2. Two-core installation" on
page 54.
Please note: It is not admissible to establish
a simultaneous connection via two-core tech-
nology and the Ethernet.
GB
Installation
53