Delayed Programme Start - Pkm WA6-E1008N Bedienungsanleitung

Press the
OPTION
into the relevant section of the dispenser.
Selection of the spin speed (E)
Press this button to select the spin speed of the washing programmes
individually (up to the maximum permitted spin speed of the selected
programme).
The maximum spin speed of the selected programme is the default setting.
To change the current spin speed press the corresponding button (E) repeatedly
until the desired spin speed is indicated on the display.
If spin speed "0" has been selected, the final spin speed will be cancelled. Before
the programme ends, the appliance drains the water only.
Selection of the temperature (D)
Using this button the temperature of the washing programme can be selected
individually (up to the maximum allowed temperature of the selected
programme).
Each of the washing programmes contains a default temperature.
To change the default temperature press the corresponding button (D) repeatedly
until the desired temperature is indicated on the display.
3.6.2 Delayed programme start (button D + button E)
You can set a delayed programme start. Set the washing programme and the
desired additional function and then activate the
1. Press the
BUTTONS
simultaneously and the delay period increases by 30 minutes. Press and hold
these S
ELECTION BUTTONS
minutes in intervals of 0.4 seconds. The programmable delay periods are from
30 minutes (min.) to 24 hours (max.). Release the buttons and press them again
to cancel your input.
2. The delay period has to be longer than the duration of the washing programme
as the set delay time defines the end of the washing programme. Example: If the
duration of the set washing programme is 02:28, the delay period must be set
between 02:30 and 24:00.
3. Press the
START
indicates the count-down. As soon as the count-down time has reached the
- until the Pre-wash indicator flashes. Fill the detergent
BUTTON
SPIN SPEED
(D + E) and the delay period increases by 30
/ -
PAUSE BUTTON
DELAY
(E)
AND
when having set the delay period; the display
54
- .
FUNCTION
(D) once
TEMPERATURE