How To Use Detergents And Additives; Preparation Of The Laundry - Pkm WA6-E1008N Bedienungsanleitung

4.2.3 How to use detergents and additives

 You can use liquid detergents for programmes including pre-wash, but - in such
a case - you have to use washing powder for main-wash.
 Do not use any liquid detergent if you have selected the
 Use a laundry ball or bag
concentrated detergents.
 Only use descaling agents which are suitable to be used in a washer. Descaling
agents can contain substances which will damage parts of the appliance.
 Only use bleaching agents and dyes which are suitable to be used in a washer.
bleaching agents and dyes can contain substances which will damage parts of
the appliance.
 Never use solvents such as turpentine, petroleum ether etc.
When you use starch:
1. Only use starch which is suitable to be used in a washer.
2. Wash the laundry using the desired programme.
3. Prepare the starch relevant to the instructions of its packaging.
4. Select
THE RINSE AND SPIN
the programme.
5. Pull the dispenser until you can see approx. 3 cm of the main-wash
compartment.
6. Pour the starch-solution into the main-wash compartment while the water is
running into the dispenser.
7. If some starch should have remained in the dispenser after programme end,
clean the dispenser.

4.3 Preparation of the laundry

1. Empty all pockets of each piece of your laundry.
2. Classify the laundry relevant to the labels: cotton, blended fabric, synthetic, silk,
wool, man-made fibres.
3. Not suitable to be washed in a washer are:
a. ties, waistcoats, coats and clothes, which will shrink easily and clothing
with components such as stickers, lace etc.
b. Crease-resistant clothing, clothing with imprints or lamination.
c. Crease-resistant silk, clothing with fur components, fur.
d. Clothing, which loose colour easily, e.g. gowns or traditional costumes.
e. Clothing contaminated with gas, petrol, paint thinner or alcohol etc.
f. Waterproof objects, e.g. skiing suits, sleeping bags, rain coats etc.
5 Not included in delivery.
to avoid dosing problems when using highly-
5
programme, decrease the speed to 800 rpm and start
59
-function.
DELAY