Introduction; Intended Use; Features; Scope Of Delivery - Parkside PMDS 100 A1 Originalbetriebsanleitung

Introduction

Modelling double bench grinder
PMDS 100 A1
Introduction
Congratulations on your purchase. You have selected
a high quality product. The instructions for use are
a part of this product. They contain important infor-
mation about safety, use and disposal. Before us-
ing the product, please familiarise yourself with all
the operating and safety instructions. Use the product
only as described and for the specified applications.
When passing this product on to others please be
sure to also include all of its documentation.

Intended use

The model-making bench grinder is intended for
grinding and polishing a wide range of materials.
It is suitable for grinding hard materials such as hard
metals, grey iron, HSS, ceramics and glass, as well
as softer materials such as copper, aluminium and
plastics. Tough materials, such as unhardened steel,
welded joints, hardened steel and titanium can also
be worked. The device is not intended for commer-
cial use. Any other uses, and / or modifications to the
tool are considered improper use and may result in
serious hazards. The manufacturer is not liable for
damage caused by improper use.

Features

Spindle-lock key
1
Protective cover
2
Tommy screw for protective cover
3
Grinding disk (Grain size 80)*
4 a
Grinding disk (Grain size 100)*
4 b
Plastic polishing disk
4 c
Cotton disk
4 d
Felt polishing disk
4 e
Steel-wire brush
4 f
Brass-wire brush
4 g
Cap
5
Workpiece support
6
6 GB/IE
Mains lead
7
Knurled screw for workpiece support
8
Grinding dust compartment
9
ON / OFF switch
10
Rotational speed control
11
Polishing mandrel
12
Shaft
13
Centring flange
14
Safety washer
15
Union nut
16
Retaining screw
17
* installed

Scope of delivery

Immediately after unpacking the device
check the contents of delivery:
1 Modelling double bench grinder PMDS 100 A1
1 Polishing mandrel
1 Polishing set (five pieces, approx. 50 mm diameter):
- Cotton disk for high polish finish
- Plastic polishing disk for coarse sanding of
metals, such as stainless steel
- Felt polishing disk for processing paint
- Steel-wire brush for rust removal and cleaning
steel and non-ferrous metals
- Brass-wire brush for polishing non-ferrous metals
and precious metals
1 Set of instructions for use

Technical Data

Modelling double bench grinder:
Parkside PMDS 100 A1
Rated input voltage:
Power input:
Protection class:
IP code:
Rotational speed n :
0
Working speed:
230–240 V∼, 50 Hz
100 W*
II /
IP 20
3000–9000 min
-1
8–24 m / s