Display Indications And Symbols - VOLTCRAFT vc165 Bedienungsanleitung

7. DISPLAY INDICATIONS AND SYMBOLS

The following symbols and information are present at the device or in the display.
OFF Switch position "off"
HOLD Call/deactivate data hold function
Data-Hold function is active
OL. Overflow display, the measuring area was exceeded
Symbol for the battery data used
Battery change symbol. When this symbol appears in the display, the battery must be replaced at
once to avoid measuring errors!
Symbol for the diode test
Symbol for the acoustic continuity tester
AC Symbol for alternating current
DC Symbol for direct current
V, mV Volt (unit of electric voltage), Milli-Volt (exp.-3)
A, mA, µA Ampere (unit of electric current),
Milli-Ampere (exp.-3), Micro-Ampere (exp.-6)
Ω, kΩ, MΩ Ohm (unit of electrical resistance), Kilo-Ohm (exp.3), Mega-Ohm (exp.6)
Button to switch the display lighting on and off
NCV EF Measuring function of the contact-free mains voltage recognition
Symbol for the LED lamp function
AUTO RANGE The automatic range selection is active.
Symbol for the integrated sensor for contact-free AC voltage detection
34