Specifications - Beurer BM 55 Gebrauchsanweisung

The technical alarm is a non-locking alarm and must not be
reset. The signal shown on the display will disappear automati-
cally after about 8 seconds.

11. Specifications

Model no. BM 55
Type M1002
Measurement Oscillometric, non-invasive blood pres-
method sure measurement on the upper arm
Measurement range Cuff pressure 0 – 300 mmHg,
systolic 60– 260 mmHg,
diastolic 40 –199 mmHg,
Pulse 40 –180 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 186 mm x W 95 mm x H 56 mm
Weight Approx. 467 g (without batteries)
Cuff size 22 to 36 cm
Permissible operating +10 °C to + 40 °C, ≤ 90 % relative air
conditions humidity (non-condensing)
Permissible storage - 20 °C to + 55 °C, ≤ 90 % relative air hu-
and transport condi- midity, 800 –1050 hPa ambient pressure
tions
Power supply
Battery life
Accessories
Classification
Technical information is subject to change without notification
to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
and is subject to particular precautions with regard to elec-
tromagnetic compatibility (EMC). Please note that portable
and mobile HF communication systems may interfere with
this unit. More details can be requested from the stated Cus-
tomer Service address or found at the end of the instructions
for use.
• This device is in line with the EU Medical Devices Directive
93/42/EEC, the "Medizinproduktegesetz" (German Medical
Devices Act) and the standards EN 1060-1 (non-invasive
sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part 3:
Supplementary requirements for electro-mechanical blood
pressure measuring systems) and IEC 80601-2-30 (Medical
electrical equipment – Part 2 – 30: Particular requirements
for the safety and essential performance of automated non-
invasive blood pressure monitors).
31
4 x 1.5 V AAA batteries
For approx. 200 measurements, de-
pending on the blood pressure level
and/or pump pressure
Cuff, instructions for use, 4 x 1.5 V AAA
batteries, USB cable, storage pouch
Internal supply, IPX0, no AP or APG,
continuous operation, application part
type BF