Ofpa - Offline Parameters - Siemens SIPART DR19 Kurzanleitung

Configuring
3.2

oFPA - Offline parameters

Parameters determining basic functions, such as display elements, limit values,
Contents
safety values etc.
Step
Accessing
1 Press button
the oFPA list
"onPA" (selection level) displayed. Blocked if digital signal bLPS = 1.
2 Press button
level). Blocked if digital signal bLS=1.
3 Press button
(configuring level). Controller now blocked and last value of y retained.
Selection and
4 Using buttons
modification
digital indicator.
of parameters
5 Press button
tons 7, 8 operate on PV-X.
6 Using buttons
indicator.
7 Press button
switched back.
8 Repeat steps 4 to 7 until all desired parameters are set.
Exit to pro-
9 Press button
cess control
10 Press button
level
manual mode.
oFPA - offline parameters
Parameter
Decimal point. x- and. w-indicator.
Scale start value
Full scale value
Alarm 1
Alarm 2 (A2 < A1)
Alarm 3
Alarm 4 (A4 < A3)
Alarm hysteresis
58
Procedure
(6) about 5 sec until "PS" flashes. Release button -
(8) several times until "oFPA" is displayed selection
(9) about 3 sec until digital indicator SP-W (2) flashes
(7) or (8). Select parameter names in the SP-W (2)
(6) once, indicator PV-X (1) flashes. Adjustment but-
(7) or (8) Modify parameter values in the PV-X (1)
(6) once, indicator SP-X (2) flashes, input field is
(13) once (selection level).
(13) once (process control level). Controller is now in
Param.- Min Max
name
dP _.---
dA -1999 9999
dE -1999 9999
A1
A2 -110 % to110 % of dA, dE
A3 with S83/S84= 0/2/3/4/5
A4
HA 0.1 10.0
Quick Reference
Factory Eng.
setting unit
--- _.- -
0.0
100.0
5.0
-5.0
5.0
-5.0
1.0 %
SIPART DR19
C73000-B7474-C140-06