Onpa - Online Parameters - Siemens SIPART DR19 Kurzanleitung

Configuring
parameter value/
configuring switch setting
parameter name/
configuring switch number
+
NOTE
More information about how to change levels and the various selections can be
found in the sections describing each configuring level.
3.1

onPA - Online parameters

Parameters that determine how the process runs and that can be modified during
Contents
unrestricted controller operation (Online)..
Step
Accessing the
1 Press button
onPA list
"onPA" (selection level) displayed. Blocked if digital signal bLPS=1.
2 Press button
level).
Selecting and
3 Using buttons
modifying
digital indicator.
parameters
4 Press button
switched over.
5 Using buttons
(1) indicator.
6 Press button
switched back.
7 Repeat steps 3 to 7 until all desired parameters are set.
Exit to pro-
8 Press button
cess control
level
9 Press button
56
Configuring level
(6)
adjustable
panel flashing
Procedure
(6) about 5 sec until "PS" flashes. Release button -
(9) once, digital indicator SP-W (2) flashes (configuring
(7) or (8) Select parameter names from SP-W (2)
(6) once, indicator PV-X (1) flashes, input field is
(7) or (8). Modify the parameter value in the PV-X
(6) once, indicator SP-W (2) flashes, input field is
(13) once (selection level).
(13) once (process control level).
Quick Reference
(7) (8)
SIPART DR19
C73000-B7474-C140-06