Operating And Monitoring - Siemens SIPART DR19 Kurzanleitung

Quick Reference
2

Operating and Monitoring

Controls and
displays on
front panel
1
2
3
4
5
6
7
8
1 Digital indicator PV-X for actual value x (pv)
Display actual
and setpoint 2 Digital indicator SP-W for setpoint w (sp) or manipulated variable y (out), other
values
values possible
3 Analog indicator for e (xd) or -e (xw), other values can be displayed
3.1 Null indicator for w-x=0
4 x signal lamp - indicates the displayed values see configuring switch S88
5 w signal lamp - lights up when w is displayed on digital indicator SP-W (2)
6 Switchover button for digital indicator SP-W (2), and adjustment buttons (7),
(8); Pushbutton to acknowledge flashing after power restored or for accessing
selection level
Modify mani- 7 Button to modify manipulated value - decrease (increase) or button "decrease
pulated value
setpoint"
8 Button to modify manipulated value - increase (decrease) or button "decrease
setpoint"
9 Switchover button "Hand/Auto" or "Enter" button for accessing the selection
level in the configuration level
10 Signal lamp "y-external operation"
11 Signal lamp "hand operation"
12 Signal lamps for the y-digital outputs with S controller
Modify set- 13 Switchover button "internal/external setpoint" or Exit button to return from
pont configuring and selection levels to the process control level
14 Signal lamp "computer (with w
15 Signal lamp "internal setpoint"
Other signals 16 "Adaptation in progress" signal lamp
17 "Limit value violated" signal lamp. Other signals possible.
+
NOTE
Operation can be disabled by the digital signal bLb; exception: switchover for
digital indicator SP-W (2).
SIPART DR19
C73000-B7474-C140-06
SIPART DR19
+
100
4 3 2
PV-X
80
C
60
ADAPT
0
SP-W
40
x
20
w
OUT-Y
-
0
SIPART DR19
SIEMENS
) switched off"
ext.
Operating and Monitoring
17
1 16
15
14
13
12
11
10
9
51