Ti200, Ti300, Ti400 Users
Manual Supplement
On page 38, following WIFI Hotspot, add:
WiFi™ Network
Infrastructure WiFi is a wireless local area network (WLAN) that links your
Imager to other wireless devices using its radio and providing a connection
through an access point to the wider Internet. This gives you the ability to move
around within a local coverage area and still be connected to the network.
To turn on the WiFi Network feature:
1. Go to Settings > Wireless > WiFi > WiFi Network.
2. Push / to highlight ON.
3. Push Select to scan for available networks within range of the camera.
4. Press / to select a network.
5. Press to connect/disconnect.
6. Enter a password if you are prompted.
3/14
3