Maintenance / Care - SRAM T3 Montageanleitung

Maintenance / Care

Caution:
• Brake pads resp. cylinders,
brake cables, shifting cables,
handlebar grips, sprockets
and bicycle chains are
wearing parts. Control this
parts regularly and replace in
time.
• If the coaster brake is loaded
excessively its effect can be
too strong, the hub may lock.
In such a case the brake shell
should be lubricated with a
special grease (this should be
done by a professional only).
• Do not use high-pressure
water when cleaning the gear
hub (e.g. strong water jets,
high-pressure cleaners etc.) –
if water penetrates it could
lead to functional problems.
• Do not use solvants or corrosive
materials to clean the compo-
nents.
• When using the bike during the
winter more frequent cleaning
is necessary to prevent damage
caused by de-icing salt.
• Clean dirty chains before
oiling. Do not use any grease-
dissolving or acidic agents.
Cleaning agent must be rinsed
off after a few minutes with
water. Apply oil after chain is
completely dried.
Coaster brake
Improved braking in third gear.
Feature:
When braking in third gear, the
indicator chain moves out of the
Deflection pulley by approx. one
chain link – after braking, the
indicator chain returns immediately
to its normal position.