fillikid 1655 Bedienungsanleitung Seite 6

Info
EN: Fixed parts and plastic elements of the child seat must be installed and fitted in such a way that
they cannot be trapped by movable seats or doors during normal use of the vehicle.
All belts used to secure the child seat in the vehicle must be tightly fastened. Any support leg present
must be securely positioned on the vehicle floor. Belts or impact shields that restrain the child must
be properly adjusted to the child's body – twisted belts must be strictly avoided.
The child seat must be replaced after an accident, even if there is no visible damage. The protective
function may be impaired due to the forces involved.
It is dangerous to make changes or modifications to the child seat without approval from the relevant
authorities or to disregard the manufacturer's installation instructions.
The child seat should not be exposed to direct sunlight, as surfaces can become very hot and may
burn the child's skin.
Children must never be left unattended in the child seat.
Loose objects or luggage inside the vehicle that could cause injury in an accident must be securely
stored.
The child seat may only be used with the designated cover. Use only the cover recommended by the
manufacturer, as it is an essential component of the seat's protective function.
Use only the anchorage points described in the manual and marked on the child seat.
Please read your vehicle's user manual before installing this i-Size child seat.
The 1655 base station complies with European safety regulation R129 (i-Size). This standard aims
to improve child safety in cars – through the promotion of universal ISOFIX installation, rear-facing
travel up to at least 15 months of age, and enhanced head and neck protection.
The base station itself is permanently installed in the vehicle. Compatible child seats can be mounted
rear- or forward-facing – depending on the child's age and size.
Currently, the base station is compatible with the following Fillikid products:
– the i-Size infant carrier NOA (model 1699)
– the child car seat model 1705
Additional compatible products will follow in the future.
Category: i-Size
Seat orientation on the base: rear-facing and forward-facing
Compatibility: Only with products approved by Fillikid
6