IKEA UDDEN CG3 Bedienungsanleitung Seite 14

ENGLISH
Removing the oven door and the glass
panel
1
Open the door fully
and hold the two
door hinges .
3
Close the oven door
to the first opening
position (approx.
45°). Then pull for-
ward and remove it
from its seat.
5
Release the locking
system to remove
the internal panel of
glass.
2
Lift and turn the lev-
ers on the two hing-
es.
4
Place the door on a
stable surface pro-
tected by a soft
cloth.
6
7
90°
Turn 2 fasteners by
90° and remove
them from their
seats.
Clean the glass panel with water and soap.
Dry it carefully.
Inserting the door and the glass panel
When the cleaning procedure is completed,
insert the glass panel and the oven door. To
do so, follow the steps in reverse.
The inner glass panel must be assembled
keeping the decorative frame (screen-print-
ing) turned towards outside of the oven. To
double check you did the above operation
in a proper way simply pass your fingers on
the inner glass surface. If the panel of glass
is assembled correctly you should not feel
any roughness.
Insert the internal panel of glass into the
right seats as shown below.
14
8
2
1
Carefully lift and re-
move the panel of
glass.