Electrical Connection - IKEA UDDEN CG3 Bedienungsanleitung

ENGLISH
• Built-in ovens and built-in cooking surfa-
ces are fitted with special connection sys-
tems. For safety reasons, you must only
combine appliances from the same man-
ufacturer.

Electrical connection

Warning! Only a qualified electrician
and competent person must do the
electrical installation.
• The manufacturer is not responsible if you
do not follow these safety precautions.
• Ground the appliance according to safe-
ty precautions.
• Make sure that the rated voltage and
type of power on the rating plate agree
with the voltage and the power of the lo-
cal power supply.
• This appliance is supplied without a plug
and a connection cable.
The following cable types are suitable for
use as mains cables, taking into account
the respective rated cross-section re-
quired: H07RN-F, H05RN-F, H05RR-F,
H05VVF, H05V2V2-F (T90), H05BB-F.
• The yellow-green earth wire should be
2-3 cm longer than all other cables.
• The cable which is used to connect the
oven to the electrical supply must have a
minimum size of 4,0mm².
If the range is placed on a base, meas-
ures have to be taken to prevent the
appliance slipping from the base.
• Any electrical component must be instal-
led or replaced by the After Sales Service
technician or qualified service personnel.
• Always use a correctly installed shock-
proof socket.
• Do not use multi-way plugs, connectors
and extension cables. There is a risk of
fire.
• Make sure that the mains plug is accessi-
ble after installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
• Connect the appliance to the mains using
a device that allows to disconnect the ap-
pliance from the mains at all poles with a
contact opening width of at least 3 mm,
eg. automatic line protecting cut-out,
earth leakage trips or fuse.
This appliance complies with the E.E.C. Di-
rectives.
10