Hob; Daily Use; Helpful Hints And Tips; Care And Cleaning - IKEA UDDEN CG3 Bedienungsanleitung

ENGLISH

Hob

Daily use

Using the hob
You operate the appliance with the combi-
nation appliance's ring switches. To switch
on the cooking zone and set the power turn
the control knob between 1 and 9.
To switch off the cooking zone turn the con-
trol knob to position 0.

Helpful hints and tips

Information on acrylamides
Important! According to the latest scientific
knowledge, intensive browning of food,
especially in products containing starch, can
constitute a health risk due to acrylamides.
Therefore, we recommend cooking at the
lowest possible temperatures and not
browning foods too much.
Energy saving
If possible, always place lids on the pans.

Care and cleaning

Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and
remove the residues with water and
washing up liquid after each use. Remove
also the remnants of the cleaning agents!
Cleaning the ceramic hob
Scratches or dark stains on the glass
ceramic that cannot be removed do
not affect the functioning of the appliance.
When a cooking zone is switched on, it
may hum briefly. This is a characteristic
of all ceramic glass cooking zones and does
not impair either the function or the life of
the appliance.
Place cookware on the cooking zone before
you switch it on.
The bottom of the cookware should be as
thick and flat as possible.
• Switch cooking zones off before the end
of the cooking time, to take advantage of
residual heat
• Bottom of pans and cooking zones should
be the same size.
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil
residues should be removed at once us-
ing a scraper. Place a scraper on the
glass ceramic surface at an angle and
remove residues by sliding the blade
over the surface. Wipe the appliance
with a damp cloth and a little washing
up liquid. Finally, rub the appliance dry
using a clean cloth.
The scraper is available in the Service
Centre or in the authorized spare parts
shops.
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for
glass ceramic or stainless steel.
16