Safety Notes - T+A R 1260 R Betriebsanleitung

All the components in this device fulfil the currently
valid German and European safety norms and
standards.
We ensure that our products are of consistently high
quality, and meet all specifications, by checking all
materials rigorously for quality, using meticulous
production methods and subjecting each unit to a
fully automatic computer-controlled final inspection.
For your own safety please consider it essential to
read these operating instructions right through, and
observe in particular the notes regarding setting up,
operation and safety.
The unit must be set up in such a way that none of
the connections can be touched directly (especially
by children). Be sure to observe the notes and infor-
mation in the section 'Installation and Wiring'.
The power supply required for this receiver is printed
on the mains supply socket. The unit must never be
connected to a power supply which does not meet
these specifications. If the receiver is not to be used
for a long period disconnect it from the mains supply
at the wall socket.
Mains leads must be deployed in such a way that
there is no danger of damage to them (e.g. through
persons treading on them or from furniture). Take
particular care with plugs, distribution panels and
connections at the receiver.
Liquid or foreign bodies must never be allowed to get
inside the unit through the ventilation slots. Mains
voltage is present inside the unit, and any electric
shock could cause serious injury or death. Never
exert undue force on mains connectors.
Protect the unit from drips and splashes of water;
never place flower vases or fluid containers on the
unit.
This device should never be used without proper
supervision. This applies to any electrical unit. Take
care to keep the unit out of the reach of small
children.

Safety notes

The case should only be opened by a qualified specialist
technician. Repairs and fuse replacements should be
entrusted to an authorised  specialist workshop. With
the exception of the connections and measures described in
these instructions, no work of any kind may be carried out
on the receiver by unqualified persons.
If the unit is damaged, or if you suspect that it is not
functioning correctly, immediately disconnect the mains plug
at the wall socket, and ask an authorised  specialist
workshop to check it.
The unit may be damaged by excess voltage in the power
supply, the mains circuit or in aerial systems, as may occur
during thunderstorms (lightning strikes) or due to static
discharges.
Special power supply units and excess voltage protectors
such as the  'Power Bar' mains distribution panel offer
some degree of protection from damage to equipment due
to the hazards described above.
However, if you require absolute security from damage due
to excess voltage, the only solution is to disconnect the unit
from the mains power supply and any aerial systems.
All mains power supply and aerial systems to which the unit
is connected must meet the current regulations and must be
installed by an approved electrical installer.
Note:
Many insurance
insurance for electrical equipment as part of their household
insurance service.
41
companies offer lightning damage