Explanation Of The Rating Plate Affixed To The Machine; Explanation Of The Pictograms; Explanation Of The Symbols - Sabo 54-R Vario B Betriebsanleitung

EN
1 INTRODUCTION
Dear gardening friend,
When the joy of gardening is added to the pride of a well-tended lawn, then you know
what you have in your garden tools. You have made a good choice with your new lawn
mower. It combines the performance of a great traditional brand with the innovations
of modern high-tech. You will feel this when you work with it, and you will be delighted
when you see the marvellous results.
But before you start with lawn care, here is some important information that you should
definitely bear in mind.
Before using the mower for the first time, read these operating instructions
carefully to familiarise yourself with the correct operation and maintenance of
the machine and to avoid injury or damage to your lawn mower.
Use the lawn mower with care. The pictograms on the appliance indicate the most
important precautionary measures.
The safety instructions in these operating instructions are labelled with symbols.
The meaning of the pictograms and symbols is explained in the following chapters.
The designations left and right always refer to the left or right side of the appliance
when viewed in the direction of travel.
If you follow the technical instructions carefully, your lawn mower will work reliably. We
would like to point out that damage to the mower caused by operating errors is not
covered by the warranty / guarantee.
We hope you enjoy lawn and grounds maintenance.
2 EXPLANATION OF THE RATING PLATE AFFIXED TO THE
MACHINE
1 Model
2 Product identification number
3 Rated power
4 Weight
5 Tested safety (depending on model)
6 Motor rated speed
7 Year of construction
8 CE conformity mark
9 Walk-behind lawn mower
10 Guaranteed sound power level
11 Serial number
These operating instructions apply to the following model:
54-R VARIO B (SA242424): With blade brake and selectable VARIO drive with speed
control via rotary handle
Please refer to the type plate for the correct model designation of your appliance and
the serial number.

3 EXPLANATION OF THE PICTOGRAMS

Read and observe the operating instructions and safety
instructions before commissioning!
Danger from spinning parts when the engine is running - keep
a safe distance / keep third parties away from the danger zone!
Beware of sharp blades! Avoid contact with the rotating blade
bar! Ensure that hands and feet do not get under the housing!
- Switch off the engine and remove the spark plug connector
before cleaning and maintenance work.
Noise hazard - Hearing protection is recommended for
prolonged use.
Cutter bar STOP
Switch on drive
Warning of hot surfaces - Do not touch the engine and exhaust.
Risk of burns!
Exhaust fumes are toxic - do not run the engine in enclosed
spaces. Danger of poisoning!
Petrol is highly flammable - keep sparks and flames away, do
not smoke. Fire hazard!
This appliance should not be disposed of with household waste. Dispose of the
appliance, accessories and packaging in an environmentally friendly recycling centre.

4 EXPLANATION OF THE SYMBOLS

WARNING
Carefully read and observe the operating instructions and general
safety regulations. Keep the operating instructions for future reference.
Intended use also includes compliance with the operating, maintenance
and servicing conditions specified by the manufacturer.
WARNING
Keep your distance / keep third parties out of the danger zone!
Contact with the rotating blade bar can lead to serious injuries.
Thrown objects can cause serious injuries.
Never mow while people, especially children, or animals are nearby.
WARNING
Petrol is highly flammable and highly explosive.
Leaking petrol and oil on the hot engine is highly flammable.
Fire and explosions can cause serious injuries and damage to property.
Do not open the fuel filler cap or top up with petrol while the engine is
running or when the machine is hot.
When the engine is running, the dipstick must always be screwed in
tightly.
WARNING
Petrol is highly flammable and highly explosive.
Fire and explosions can cause serious injuries and damage to property.
Smoking and open flames are prohibited when refuelling.
WARNING
Beware of sharp blades! Contact with the rotating blade bar can lead to
serious foot injuries.
Only start the engine while standing behind the mower
Make sure that the feet do not get under the housing.
WARNING
Beware of sharp blades! Contact with the rotating blade bar can lead to
serious hand and foot injuries.
When the motor/blade is running, maintain the safety distance given by
the length of the guide rail.
Ensure that hands and feet do not get under the housing.
WARNING
Thrown objects can cause serious injuries.
Before mowing, remove all stones, sticks, wires, toys and other foreign
objects from the lawn, especially from areas covered with leaves.
Never use the appliance with damaged or missing protective devices.
Missing or damaged safety and protective equipment jeopardises your
safety and the safety of others.
Check the fastening of the blade screw before first use, then check the
blade bar for tight fit, wear and damage before each mowing session.
Have a worn or damaged blade replaced by an authorised specialist
workshop . Have the blade bolt tightened by an authorised specialist
workshop.
Before starting the engine, check that the tools have been removed.
CAUTION
Exhaust and engine reach very high temperatures during operation.
Risk of burns!
Allow the machine to cool down for at least 15 minutes before carrying
out maintenance and cleaning work.
Never use the appliance with a damaged or missing exhaust guard.
WARNING
Electric shock can cause serious injury.
Never drive over live cables with the cutting tool switched on.
Check the area for live cables before and during mowing and remove
them if possible.
If a live cable is damaged, switch off the appliance and disconnect the
cable from the mains supply.
CAUTION
If the spark plug connector is not disconnected when working on the
appliance, the engine could start and cause serious injury.
Before carrying out maintenance and repair work, switch off the engine,
disconnect the spark plug cap and remove the ignition key, if present.
2