Bosch eShift Originalbetriebsanleitung Seite 9

eShift with Shimano Di2
When using eShift with Shimano Di2, you always shift gears
via the Shimano gear lever.
Since eShift detects the gear shift, the gear is shifted at the
optimum time with a brief interruption of the drive assist-
ance. This makes it possible to switch under load.
You can switch between manual and automatic switching
mode using a separate button on the Shimano gear lever.
eShift with Intuvia 100
The engaged gear will be shown briefly on the display screen
whenever the gear is shifted. A permanent gear display is
not available.
The required cadence for automatic mode is set using
the eBike Flow app (available in the Apple App Store or
Google Play Store).
eShift with Kiox 300/Kiox 500/Kiox 400C/
Purion 200/Purion 400
The gear currently engaged and the switching mode
(manual/automatic) activated are displayed on the start
screen only.
You can find information about the version of your gear sys-
tem in the menu <Settings> → <My eBike> → <Compon-
ents>.
For more information, read the operating instructions for
your control unit.
eShift with GearSensor
When using eShift with GearSensor, you always shift gears
via the mechanical gear lever from the gearing manufacturer.
Since eShift detects the gear shift, the gear is shifted at the
optimum time with a brief interruption of the drive assist-
ance. This makes it possible to switch under load.
A display of the engaged gear is not available.
eShift with Kiox 300/Kiox 500/Kiox 400C/
Purion 200/Purion 400
You can find information about the version of your gear sys-
tem in the menu <Settings> → <My eBike> → <Compon-
ents>.
For more information, read the operating instructions for
your control unit.
Bosch eBike Systems
eShift with Classified
When using eShift with Classified, you always shift gears via
the Classified gear lever.
Since eShift detects the gear shift, the gear is shifted at the
optimum time with a brief interruption of the drive assist-
ance. This makes it possible to switch under load.
eShift with Intuvia 100
The engaged gear will be shown briefly on the display screen
whenever the gear is shifted. A permanent gear display is
not available.
eShift with Kiox 300/Kiox 500/Kiox 400C/
Purion 200/Purion 400
The gear currently engaged is only displayed on the start
screen.
You can find information about the version of your gear sys-
tem in the menu <Settings> → <My eBike> → <Compon-
ents>.
For more information, read the operating instructions for
your control unit.
After-sales service and advice on
using products
If you have any questions about the eBike and its compon-
ents, contact a specialist workshop.
For contact details of specialist workshops, please visit
www.bosch-ebike.com.
Further information on the eBike components
and their functions can be found in the Bosch
eBike Help Center.
English – 3
0 275 007 3ES | (08.01.2025)