Bosch eShift Originalbetriebsanleitung Seite 8

English – 2
eShift with Rohloff E‑14 2.0
When using eShift with Rohloff E‑14 2.0, you always shift
gears via the Rohloff gear lever.
Since eShift detects the gear shift, the gear is shifted at the
optimum time with a brief interruption of the drive assist-
ance. This makes it possible to switch under load.
You can switch between manual and automatic switching
mode using a separate button or a specific key combination
on the Rohloff gear lever.
eShift with Intuvia 100
The engaged gear will be shown briefly on the display screen
whenever the gear is shifted. A permanent gear display is
not available.
The required cadence for automatic mode is set using
the eBike Flow app (available in the Apple App Store or
Google Play Store).
eShift with Kiox 300/Kiox 500/Kiox 400C/
Purion 200/Purion 400
The gear currently engaged and the switching mode
(manual/automatic) activated are displayed on the start
screen only.
You can find information about the version of your gear sys-
tem in the menu <Settings> → <My eBike> → <Compon-
ents>.
For more information, read the operating instructions for
your control unit.
eShift mit 3X3 E9.XP
For eShift with 3X3 E9.XP, you always shift gears using the
3X3 gear lever.
Since eShift detects the gear shift, the gear is shifted at the
optimum time with a brief interruption of the drive assist-
ance. This makes it possible to switch under load.
You can switch between manual and automatic switching
mode using a specific key combination on the 3X3 gear
lever.
eShift with Intuvia 100
The engaged gear will be shown briefly on the display screen
whenever the gear is shifted. A permanent gear display is
not available.
The required cadence for automatic mode is set using
the eBike Flow app (available in the Apple App Store or
Google Play Store).
0 275 007 3ES | (08.01.2025)
eShift with Kiox 300/Kiox 500/Kiox 400C/
Purion 200/Purion 400
The gear currently engaged and the switching mode
(manual/automatic) activated are displayed on the start
screen only.
You can find information about the version of your gear sys-
tem in the menu <Settings> → <My eBike> → <Compon-
ents>.
For more information, read the operating instructions for
your control unit.
eShift with TRP E.A.S.I. A12
For eShift with TRP E.A.S.I. A12, always shift gears using the
TRP gear lever.
Since eShift detects the gear shift, the gear is shifted at the
optimum time with a brief interruption of the drive assist-
ance. This makes it possible to switch under load.
You can switch between manual and automatic switching
mode using a separate button on the TRP gear lever.
eShift with Intuvia 100
The engaged gear will be shown briefly on the display screen
whenever the gear is shifted. A permanent gear display is
not available.
The required cadence for automatic mode is set using
the eBike Flow app (available in the Apple App Store or
Google Play Store).
eShift with Kiox 300/Kiox 500/Kiox 400C/
Purion 200/Purion 400
The gear currently engaged and the switching mode
(manual/automatic) activated are displayed on the start
screen only.
For eShift with TRP E.A.S.I. A12, you can use the control
unit to change the required cadence while riding. Press the
select button on your control unit for more than 1 s and then
select <eShift>.
You can find information about the version of your gear sys-
tem in the menu <Settings> → <My eBike> → <Compon-
ents>.
For more information, read the operating instructions for
your control unit.
Bosch eBike Systems