Herunterladen Diese Seite drucken

Dantherm I-PAC PRO Installationsanleitung Seite 44

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Warranty
Terms and conditions
44
NOTICE
Warranty Exclusions:
The following exclusions apply to the warranty provided by Dantherm Group . No claims will
be accepted if any of the following points or conditions are applicable:
• The heat pump has been installed in a manner not in accordance with the current proce-
dures outlined by Dantherm Group .
• The heat pump has been serviced, worked on, or adjusted by anyone not authorised by
Dantherm Group .
• The heat pump is incorrectly sized for the intended application .
• The water flow through the heat pump is outside the specified limits .
Acidity pH
Total Alkalinity as CaCO3
Total Hardness as CaCO3
Total Dissolved Solids
Maximum Salt Content
Free Chlorine Range (Domestic)
Free Chlorine Range (Commercial)
Superchlorination
Bromine
Baquacil
Ozone
Maximum Copper Content
Aquamatic Ionic Purifier
• The water pH level and/or chemical balance are outside the specified limits .
The heat pump has sustained frost damage .
• The electrical supply is insufficient or incorrect in any way .
• The fan amperage and duct pressure are outside the specified limits .
• The airflow to or from the heat pump is outside the specified limits .
INFO
If in doubt or if advice is required, please contact the Dantherm Group UK Service Depart-
ment by calling +44 (0) 1621 856 611 (option 2) or email service .uk@danthermgroup .com .
When making technical or service enquiries, please provide the heat pump model number
and serial number . This will assist in accurate diagnosis and ensure service can be provided
with minimal delay .
Warranty: Terms and conditions
pH
7 .2 ~ 7 .8
ppm
80 ~ 120
ppm
150 ~ 250
ppm
ppm
ppm
ppm
max
30 ppm for 24 hours
ppm
ppm
ppm
ppm
ppm
1000
35000
1 ~ 2
3 ~ 6
2 ~ 5
25 ~ 50
0 .9 max
1
2 max

Werbung

loading