Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation: Heat pump control panel
Operation
Heat pump control panel
Screen lock
If there is no activity for more than 30 seconds, the screen will automatically lock ,
illuminate, and the other buttons and indicators will dim .
Press and hold
then illuminate .
Press and hold
all the other buttons and indicators will dim .
If the screen is locked with the Wi-Fi connected then both
ed, while all other buttons and indicators will be dim . .
Only
Power on
Press and hold
heat pump .
Temperature setting
Press
Heat, cool and auto mode selection
Press
Heating Mode
Cooling Mode
Auto Mode
In Auto mode, cooling will automatically start if the water inlet temperature exceeds the
set point .
Heating will automatically start if the water inlet temperature drops below the set point .
for three seconds to unlock the screen . All buttons and indicators will
for three seconds to lock the screen,
functions when the screen is locked; all other buttons are disabled .
for three seconds to unlock the screen, then press
or
to display and adjust the required set temperature .
to switch between heating, cooling and auto modes .
Mode
Symbol
will remain illuminated and
and
will be illuminat-
to power on the
Water temperature setting range
o
o
18
C to 40
C
o
o
5
C to 30
C
o
o
5
C to 40
C
will
23
Werbung
