Stihl FSA 65 Gebrauchsanleitung Seite 45

Hold the mowing head steady.
N
Rotate the spool counterclockwise
N
until the shortest line is about
10 cm.
If necessary, cut the longer line to a
N
length of about 10 cm.
The mowing head is now full.
Mounting the Mowing Head
8
6
7
9
Slip the mowing head (6) over the
N
shaft (7) and engage hex recess (8)
on the external hexagon (9).
FSA 65, FSA 85
1
2
Turn the spool (2) clockwise until
N
the two arrow heads line up –
secure the spool in this position.
Insert the cap (1) in the spool (2),
N
press it down as far as stop and turn
it clockwise at the same time.
Turn the cap (1) as far as stop and
N
tighten it down by hand.
English
43