User's Manual
22.1. Turning-on of an easyTRX2
After the easyTRX2 Transceiver is connected according point 3 to the 12V
supply and is switched on, all eight visible LED on the top of the unit will
illuminate once for a period of one second. Subsequently every 2
flashes for one second and after that the remaining LED will be
illuminated for one second.
LED display
CPA, AIS S.A.R.T. & anchor alarm
This LED flashes if a ship enters the defined CPA (Closest point of
approach) radius, an AIS S.A.R.T alert is received or your anchor
alarm is activated
Error
This LED is illuminated if there is an error. They cause may be the
antenna or e.g. a hardware error.
Weatherdock AG
Sigmundstraße 180
Tel.:+49 911 37 66 38 30
D-90431 Nürnberg
www.weatherdock.de
Page 111 of 125
nd
LED