Weatherdock easyTRX2 Handbuch Seite 77

User's Manual

type of vessel

rotational speed/turn rate
Static information:

call sign and name of the vessel

length and width of the vessel

IMO-number of the vessel, if existent

type of vehicle

position of the GPS sensor onboard
Journey-related information:

draught of the vessel

type of cargo

port of destination and estimated time of arrival (ETA)

route plan, optional
The block of dynamic information is the most important block with regard
to threatening collisions. Therefore this block of information is
transmitted in a compulsory way, depending on the vessels movement.
The following table shows the mandatory repetition rate of the "Class A"
Transceiver linked to the ship's movement:
anchored vessels:
vessels at 0 – 14 kn:
vessels at 0 – 14 kn, fast maneuver:
vessels at 14 – 23 kn:
vessels at 14 – 23 kn, fast maneuver:
vessels at > 23kn:
vessels at > 23 kn, fast maneuver:
The static data such as information regarding the journey is dispersed
every 6 minutes.
This data is sent in turns according to the stipulated period to the one
(161.975 MHz) and subsequently to the other channel (162.025MHz).
Weatherdock AG Sigmundstraße 180
Tel.:+49 911 37 66 38 30
3 minutes
10 seconds
3.3 seconds
6 seconds
2 seconds
2 seconds
2 seconds
D-90431 Nürnberg
www.weatherdock.de
Page 77 of 125