User's Manual
19. MOUNTIN AND INSTALLATION
19.1. Programming Procedure
Installation of the PC software
o
Connection of the easyTRX2 device by means of the
supplied cable to the USB port of the PC
o
THEN, connection of the easyTRX2 device to 12VDC
Start the easyTRX2 Programming Software.
Configuration of ship data (enter the MMSI carefully), although
the MMSI is usually entered by the distributor.
The software is designed plain and simple. You need to enter the MMSI
and the other ship data. Please keep in mind that the MMSI can only be
entered once. Please contact your service partner if the MMSI was entered
wrongly or if you are required to enter a new and different MMSI. He can
Weatherdock AG
Sigmundstraße 180
Tel.:+49 911 37 66 38 30
D-90431 Nürnberg
www.weatherdock.de
Page 80 of 125