Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Meat probe recipes
1.
Select "Meat probe recipes" using the up and down buttons and confirm by pressing
2.
Select the dish to be cooked from the proposed list and confirm by pressing
N.B.: if you select "custom", the function allows you to choose all parameters to be set. The other
recipes only allow you to insert some of these.
3.
Connect the probe, put the food in the oven and press
N.B.: if the probe has not been connected, the display will show a message prompting you to insert it.
If it is not inserted, when you press
time.
Traditional
Meat Probe Recipes
Specials
Automatic roasting functions
If the probe has been connected properly, the display shows a confirmation message for three seconds
followed by a screen indicating all cooking parameters, including the core temperature of the meat as
measured by the probe.
When the required core temperature for the particular food is reached, a message to that effect flashes on
the display for 3 seconds. At the end of cooking time, the oven proposes the option of prolonging cooking
time by pressing
. If the button is pressed, cooking continues using the traditional mode without any
time setting. If no button is pressed, the oven waits 10 minutes before switching off, after which cooking
can no longer be prolonged.
Meat Probe
has been connected
The probe can also be used with the CONVENTIONAL, CONVECTION BAKE, FORCED AIR, TURBO GRILL,
MAXI COOKING SLOW COOKING MEAT and SLOW COOKING FISH. If the probe is not inserted, cooking
proceeds using the traditional mode, otherwise, the display advises that the probe is not connected. The
message will display for 3 seconds, after which the oven proceeds as if the "custom" function as indicated
above has been selected.
180°C
--:--
TEMPERATURE
COOK TIME
Conventional
No
--:--
PREHEAT
END TIME
FAVOURITES
This oven allows you to store selected settings for cooking your favourite dishes.
At the end of cooking, if you wish to save the settings used (function, cooking time, temperature...), press
the button
. At this point, the display shows "Press OK to save".
Press OK to save,
<< to cancel
When the button
stored Favourites. If you wish to save it in a different position, you can change the number by pressing
buttons
before confirming your selection with button
has already been taken, the function will be overwritten.
If, on the other hand, you do not wish to store the settings, simply press the button
another function by pressing the buttons
To bring up your saved settings at a later date, press the button
then press the buttons
Press the button
, the oven will start a traditional cooking cycle without a set
Roast Veal
Custom
Roast Beef
Automatic roasting functions
150°C
100°C
TEMPERATURE
MEAT PROBE
Cooking
79°C
CURRENT
Insert Meat Probe
or press OK
2
Forced Air
Press OK to save, << to cancel
is pressed, the oven will propose saving your selection as number 1 of 10 available
to view the desired function.
and start cooking by pressing the button
to start cooking.
Insert Meat Probe
or press OK
150°C
100°C
TEMPERATURE
MEAT PROBE
Temperature reached
100°C
CURRENT
150°C
100°C
TEMPERATURE
MEAT PROBE
Conventional
Favourite
has been saved
or else switch the oven off.
and select one of the stored functions,
.
GB39
. If the memory is full or the position
and move on to
Werbung
Inhaltsverzeichnis
