Cyrusher RUMBLE Montageanleitung Seite 6

Part1 Remove Packaging & Handlebar Assembly
THIS SIDE
UP
DO NO T
LAY FLAT
5
Fold the riser upwards and
tighten the folding buckle.Tighten
the safety buckle
05
Cut the tape on top edges to lift the top sides to unbox your e-bike.
1
2
Find the tools and parts included.(may vary by model)
3
Pull the bike up from the top
Place the bike on a soft surface, to avoid damage to the paint.
4
It is recommended, whenever possible, to keep the box for 1-2 weeks in case of
!
return.The bike can be heavy, you may need someone to help you.
6
Remove the riser valve cover
screws and remove the valve
cover
Computer
display facing
inwards.
7
Place the handlebar inside the stem.Screw
bolts loosely into position to allow handlebar
to be adjusted before fixing it firmly into place
by tightly screwing the bolts into position.