Cyrusher RUMBLE Montageanleitung Seite 15

8.Power-on password setting
08P is the power-on password setting. The power-
on password is not activated by default but users
can activate it from setting PSd-y. The factory default
password is 1212. Users can set other four-digit password.
Please keep the password in mind after changing it, otherwise
!
you will not be able to use the display.
Press [ ] to enter the parameter changing state. Press
the [ ] / [ ]to select the parameter. PSd-y means the
power-on password is activated while PSd-n is off. Press
[ ] to confirm the mode and enter the state of setting
the four digits power-on password or exit to the
personalized parameter setting interface.
Figure 8.1-
Power-on Password
OFF interface
Figure 8.2-
Power-on Password
Activated interface
ASSEMBLY GUIDE | CYRUSHER RUMBLE
In the password setting mode, the adjustable digit will
flash.Press the [ ] / [ ]to select the parameter and
press [ ] to save the numbers and go to the next digit
setting. Press [ ] to save the parameter setting and
return to the personalized parameter setting interface
after finish setting the four digits in turn.
Figure 8.3-
Power-on password
setting interface
14