Cyrusher RUMBLE Montageanleitung Seite 16

Part4 Shortcut operation
1.Restore factory default parameter
settings operation
dEF is the restore factory default parameter settings.
dEF-Y is to restore default settings, and dEF-N is not to
restore.
Enter into the main setting interface and keep the speed
at 0, press and hold [ ] / [ ]simultaneously for 2s to
enter the restore factory default setting interface. Pressing
[ ] / [ ] to toggle to dEF-Y. Then after pressing [ ] to
confirm, the display will show dEF-0 for a few seconds
and then automatically start to restore the factory default
settings.The display will automatically exit to setting
interface after the restoration.
Figure 1-Restore factory default
parameter Settings Interface
15
2.Trip odometer reset operation
The display can record trip odometer and odometer. Trip
odometer is not automatically reset after turning off. The
trip odometer needs to be reset manually.
Enter into the main setting interface and keep the speed
at 0, press and hold [ ] and [ ] simultaneously for 2s
to reset the trip odometer. The main interface will flash
during the reset process.
Figure 2-Trip Odometer Reset Interface