Gears; Tires & Inner Tubes - Cyrusher Rumble Montageanleitung

05
/

GEARS

06
/
TIRES &
INNER TUBES
Your cyrusher E-Bike is equipped with multiple speeds.The first gear is for
easier and uphill pedaling, and the last gear is for maximum speed on
level or downhill terrain.Change gears only while pedaling.
The rear wheel contains seven or nine chain sprockets
model . When the chain is around the largest sprocket, you are in 1st
)
gear, or the lowest gear.The high gear will have the derailleur positioned
so that the chain is directed around the smallest gear. Every position on
the gear selector should cause a gear change. Adjustments require fine
tuning and should only be made by a qualified technician.
Avoid changing gears very rapidly from first gear to the last gear or vice
versa. lf you change multiple gears too quickly, you could cause the
chain to come off the sprocket.
Tires should not be deflated unless necessary.To minimize tire wear
and for maximum riding safety,comfort, and handling, maintain recom-
mended tire air pressure. This can be found on the side wall of all tires.
Use a reliable tire air pressure gauge to check for proper inflation before
every ride. At the same time, inspect tires for excessive wear and cracks.
Replace tires if necessary.
ASSEMBLY GUIDE | CYRUSHER RUMBLE
depending on
(
20