Cyrusher RUMBLE Montageanleitung Seite 13

1.Metric and lmperial setting
01P is the metric and imperial setting, 00 for metric and
0l for imperial.
Press [ ] to enter the parameter changing state.
Press the [ ] / [ ]to select the parameter and press
[ ] to save the parameter setting and return to the
personalized parameter setting interface.
Figure 1-Metric and lmperial
Units Setting Interface
2.Wheel diameter setting
02P is the wheel diameter setting. The adjustable wheel
diameter range is: 1~50inch.
Press [ ] to enter the parameter changing state.
Press the [ ] / [ ]to select the parameter and press
[ ] to save the parameter setting and return to the
personalized parameter setting interface.
3.Speed Limit Setting
03P is the speed limit setting. The adjustable speed limit
range is: 1~100km/h.
limit varies by different protocols
Press [ ] to enter the parameter changing state.
Press the [ ] / [ ]to select the parameter and press
[ ] to save the parameter setting and return to the
personalized parameter setting interface.
4.Start-up setting
04P is the stat-up setting option. The display can choose
the following stat modes: 00-zero start, 01-non-zero
start.
Press [ ] to enter the parameter changing state.
Press the [ ] / [ ]to select the parameter and press
[ ] to save the parameter setting and return to the
personalized parameter setting interface.
Figure 2-Wheel
diameter setting
interface
ASSEMBLY GUIDE | CYRUSHER RUMBLE
The maximum adjustable speed
(
.
)
Figure 3-Speed limit Figure 4-Start-up
setting interface setting interface
12