IKEA KULINARISK Bedienungsanleitung Seite 26

ENGLISH
3
Close the oven door
halfway to the first
opening position.
Then pull forward
and remove the
door from its seat.
5
Release the locking
system to remove
the glass panels.
7
2
1
First lift carefully
and then remove
the glass panels one
by one. Start from
the top panel.
Clean the glass panels with water and
soap. Dry the glass panels carefully.
4
Put the door on a
soft cloth on a
stable surface.
6
90°
Turn the two
fasteners by 90°
and remove them
from their seats.
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels (A
and B) back in the correct sequence. The
first panel (A) has a decorative frame. The
screen-printing zone must face the inner
side of the door. Make sure that after the
installation the surface of the glass panel
frame (A) on the screen-printing zones is
not rough when you touch it.
A B
Make sure that you install the middle panel
of glass in the seats correctly.
26