Herunterladen Inhalt Inhalt Diese Seite drucken

IKEA KULINARISK Bedienungsanleitung Seite 22

Vorschau ausblenden Andere Handbücher für KULINARISK:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
When you deactivate the
appliance, the function also
deactivates.
Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of a sensor field.
1. Activate the appliance.
2. Set a heating function.
3. Press
again and again until the
display shows: Duration.
4. Set the time.
5. Press
again and again until the
display shows: Set + Go.
6. Press
to confirm.
Press a sensor field (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, an acoustic
signal sounds.
• Function Lock is on when the
heating function operates.
• The menu: Basic Settings lets
you activate and deactivate
the function: Set + Go.
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time if
a heating function operates and you do not
change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 245
) to start
Switch-off time (h)
12.5
8.5
5.5
Temperature (°C)
250 - maximum
The Automatic switch-off does
not work with the functions: Light,
core temperature sensor, End
Time, Duration.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– if the appliance is deactivated and
you set the function: Minute Minder.
When the function ends, the display
goes back to the night brightness.
Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.
Safety thermostat
Incorrect operation of the appliance or
defective components can cause dangerous
overheating. To prevent this, the oven has a
safety thermostat which interrupts the
power supply. The oven activates again
automatically when the temperature drops.
22
Switch-off time (h)
1.5

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis