Wheel Kit Installation - Honda EU70IS Bedienungsanleitung

36Z376000.book 83 ページ ２０１４年９月１９日 金曜日 午後６時２６分

Wheel Kit Installation

Do not operate the generator without the wheel kit installed. The wheel
kit provides air space between the ground and the generator air intake.
If the wheel kit is not installed, it may be possible for dirt and debris to
be drawn into the generator air intake, possibly causing generator
damage. Always operate the generator with the wheel kit installed.
1.Install the two wheels on the axle using the 20 mm washers and
4.0×28 mm cotter pins.
2.Install the axle assembly on the generator using four 8×20 mm
flange bolts.
3.Install the two stands on the under frame using four 8×20 mm
flange bolts.
TORQUE: 15–22 N·m (1.5–2.2 kgf·m, 11–16 lbf·ft)
STAND (2)
8×20 mm
FLANGE BOLT (4)
WHEEL (2)
8×20 mm
FLANGE BOLT (4)
AXLE
20 mm WASHER (2)
ASSEMBLY
SHORTER
4.0×28 mm
COTTER PIN (2)
83