Honda EU70IS Bedienungsanleitung Seite 46

36Z376000.book 43 ページ ２０１５年１０月１６日 金曜日 午後５時３５分
2. Start the engine on each generator and make sure each OUTPUT
indicator (green) comes ON.
3. Plug in the appliance following the instructions provided with the
parallel kit.
4. Turn on the appliance.
If the generators are overloaded (see page 45), or if there is a short
circuit in a connected appliance, the OVERLOAD ALARM indicators
(red) will come ON. The OVERLOAD ALARM indicators (red) will stay
ON, and after about five seconds, current to the connected
appliance(s) will shut off, and the OUTPUT indicators (green) will go
OFF. Stop both engines and investigate the problem.
Determine if the cause is a short circuit in a connected appliance or an
overload. Correct the problem and restart the generators.
OPERATION
43