Spark Arrester Service - Honda EU70IS Bedienungsanleitung

36Z376000.book 61 ページ ２０１４年９月１９日 金曜日 午後６時２６分

SPARK ARRESTER SERVICE

If the engine has been running, the muffler will be very hot. Allow the
muffler to cool before servicing the spark arrester.
1.Remove the two 5×16 mm pan head screws, and remove the tail
pipe and spark arrester.
SPARK ARRESTER
TAIL PIPE
5×16 mm PAN HEAD SCREW (2)
2.Use a brush to remove carbon deposits from the spark arrester
screen.
Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and tears. Replace the
spark arrester if it is damaged.
3.Install the spark arrester in the reverse order of removal.
SERVICING YOUR GENERATOR
61