Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Select
Interfaces
and press
6. Enter the following data under
Operational
mode:
IP address:
Netmask:
7. Press
to save your settings.
F2
Configuring global network settings
In complex networks, global network settings ensure that the matrix switch is avail-
able from all sub networks.
How to configure global network settings:
1. Press
Ctrl+Num
(default) to open the OSD.
2. Press
F11
to call the Configuration menu.
3. Select
Network
and press
4. Select
and press
Interfaces
5. Enter the following data under
Global prefer-
Select the operating mode by pressing
ences
Static:
DHCP:
Hostname:
Enter the matrix switch hostname.
Domain:
Enter the domain the matrix switch is to belong to.
Gateway:
Enter the gateway IP address.
DNS 1:
Enter the DNS server IP address.
DNS 2:
Enter the IP address of another DNS server (option).
6. Press
F2
to save your settings.
7.
Enter
.
Interface A
or
Press
F8
to select the operating mode of
Interface B
:
switches off network interface.
Off:
Static:
uses static settings.
DHCP:
obtains the settings from a DHCP server.
Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.
Enter the network netmask.
This setting is auto obtained in the DHCP operating mode.
Enter
.
.
Enter
Main Network
uses static settings.
auto obtains the settings described below from a
DHCP server.
Initial configuration of network settings
Interface B
:
:
:
F8
G&D ControlCenter-Compact · 15
Interface A
or
Werbung
