Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Initial configuration of network settings
Configuring network ports
A matrix switch, which is integrated into the network, can only be addressed after
the network ports are configured.
IMPORTANT:
In the default settings, the
192.168.0.1
.
After the console module has been switched on, the KVM matrix system asks you to
log in.
How to configure the settings of a network port:
1. Enter the following data to the login box:
Terms
(of use):
Accept (of
terms of use):
Username:
Password:
2-Factor Auth
Code (TOTP):
IMPORTANT:
Change the administrator account's default password.
The default access data is:
Admin
Username:
Password:
see login information on the label attached to the controller card
NOTE:
The default admin password for devices manufactured before
October 2020 is
NOTE:
The Terms field and the Accept field only appear if Showing terms of use
is activated. For detailed information, please refer to the separate manual of
the web application.
NOTE:
The 2-Factor Auth Code (TOTP) field only appears if 2-factor-authentica-
tion is enabled. For detailed information, please refer to the separate manual of
the web application.
2. Press
Enter
to log in and open the OSD.
3. Press
to call the Configuration menu.
F11
4. Select
and press
Network
14 · G&D ControlCenter-Compact
Press
Enter
to display the terms of use.
Press
to accept the terms of use.
F8
Enter your username.
Enter your user account password.
Enter the 2-Factor Auth Code (TOTP) from two-factor
authentication.
.
4658
.
Enter
Network A
port is assigned to the IP address
Werbung
