Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BEHNCKE Level Control / Conversion to channel tank expansion in conjunction with Control 1.3
8
Conversion to channel tank expansion in conjunction with Control 1.3
•
Mode to extend the control 1.3 by the function of the channel tank control.
•
By activating the "Extender Mode" function, the level control is permanently set to this mode.
8.1 Activation
To enable channel tank expansion mode:
•
Supply the level control with power.
•
Do not connect the bus cable.
•
Service menu -> Set authorisation -> Enter code (see leaflet for PIN)
Service menu -> Extender mode -> Confirm
•
The display switches off on the level control.
•
The green status LED on the motherboard changes the flashing frequency (slower)
•
Connect the bus cable to Control 1.3.
8.2 Connectors
You can find the connections in the circuit diagram in the Technical illustrations index.
15
NOTE
This function can only be used in conjunction with Control 1.3.
WARNING
When you change level control to the channel tank extension function,
you won't be able to undo this anymore!
NOTE
As soon as channel tank mode is activated, no further input via the buttons is
possible and the display is deactivated.
Operation will be exclusively via Control 1.3.
NOTE
The status LED on the motherboard will show which mode is currently set
(see index: Technical illustrations):
Channel tank extension:
Normal mode:
NOTE
The password for the craftsman level can be found in the enclosed note for
system installers.
LED flashes slowly: 2s on, 2s off
LED flashes quickly: 0.5s on, 0.5s off
Werbung
