Behncke Niveau Control Betriebsanleitung Seite 31

2.8 Personal protective equipment
Wearing personal protective equipment while working is required in order to minimise health risks.
• Wear the protective equipment required for the work in question at all times while working.
• Follow any signs in the work area regarding personal protective equipment.
The following protective equipment must be worn for all work:
2.7 Technical data
Parameter
VCC Supply voltage
ΔVCC Supply voltage tolerance
Pin Max. power consumption
TU Ambient temperature
Type of protection
Switching power
Fuse protection
Protective clothing
Describes close-fitting work clothing with low tensile strength,
with tight sleeves and without protruding parts.
Do not wear rings, chains or any other jewellery.
Wear a hair net!
Safety boots
For protection against heavy falling parts, slipping on slippery ground,
from electric shocks and from being stabbed by sharp-edged pieces.
BEHNCKE Level Control / Safety
Conditions
Max.
for correct installation
max. 16A
max. 2A
max. 2A
Value
230VAC
± 10%
6VA
0-40°C
IP 65
1x 230V
4x 230V
4x pot. free contact
10A, medium time lag
(Filter pump outlet)
10A, medium time lag
(Combined for
4 switching outputs)
8