Behncke Niveau Control Betriebsanleitung Seite 37

Start-up
Service menu
menu
Set
language
Level control
app: V . .
BEHNCKE Level Control / How the hanging electrodes work
Delete FW
fault?
Delete central
fault messages?
Test
outputs
View
digital inputs
Reset
fact. settings
Select language
DANGER
Danger of suction!
When using the lowering function, it must be ensured that the suction systems
are designed and installed in accordance with the recognised codes of
practice.
DANGER
Only flush the filter if it has been previously ensured that sufficient water is
present in the water storage tank or in the pool. When the water is removed
directly from the swimming pool, ensure that, when it comes to the volume
flow for the filter flushing, the extraction points are dimensioned in such a way
that there are no hazards with respect to suction or capture point.
DANGER
To prevent the floor outlets from becoming a source of danger to suction
/ trapping, they must be dimensioned and installed in accordance with the
recognised codes of practice
Fresh water fault messages
Set the date. Press "OK" to continue to the next input field.
Delete central fault messages
Set the date. Press "OK" to continue to the next input field.
FP:
Filter pump
Test outputs
FV:
Here you can test the outputs manually.
Filter valve
Automatic:
On:
BA:
Off:
Floor valve
FW:
Filling valve
All automatic outputs
All:
Here you can quickly set all outputs back to "Auto".
Set outputs
Condition:
Manual backflush
Condition:
Hanging elect. 2
Condition:
Hanging elect. 3
Condition of digital inputs
Here you can see the current condition of the respective input.
Condition:
Hanging elect. 4
Condition:
Hanging elect. 5
Condition:
Hanging elect. 6
Reset to factory defaults
By confirming this menu item, all settings are discarded and
the control system is reset to factory settings!
Select menu language
Set language.
You can choose between German, Spanish or English.
Version info
Displays the installed version of the control system.
Output behaves according to the set parameters
Continuous "On" state
Continuous "Off" state
NOTE
After testing, make sure you set it back to
"Auto"!
14