+GF+ 2298 Bedienungsanleitung Seite 19

Instruction manual
Color coding of the terminals
Extending the cable:
It is recommended to use a terminal box to extend the cable.
The shielding must be connected to the shielding of the extension cable and grounded at the processing device.
The green and yellow wires are the connection points of the "Service interface" (see next chapter). They are not required for
using the device. They are covered with a shrink tube at the cable end by default.
Type 2298 80 GHz Radar Level Sensor
Pin no. Assignment
pink C1 relay output
gray CC relay output
blue
C2 relay output
white I Current loop, supply voltage, and HART
terminal 1 (polarity-independent)
brown I Current loop, supply voltage, and HART
terminal 2 (polarity-independent)
black GND Technical ground and shielding
point
19