3 Symbols on the Product
IP addresses of Modbus devices
In systems with Modbus devices, static IP addresses
must be assigned to all Modbus devices. Suitable IP
addresses can be assigned to the Modbus devices
from the free address supply of the network segment
either manually or dynamically via DHCP.
If the IP addresses are to be assigned dynamically,
DHCP must be activated in the Internet router (see
the Internet router manual). Make sure that the
Modbus devices do not contain variable IP
addresses but always the same IP addresses (static
DHCP).
This also applies to Data Managers that are used as
subordinate devices.
If IP addresses of Modbus devices have been
changed, all devices must be restarted.
Communication disturbances in the
local network
The IP address range 192.168.12.0 to
192.168.12.255 is occupied for communication
amongst SMA products and for direct access to
SMA products.
Communication problems might occur if this IP
address range is used in the local network.
• Do not use the IP address range
192.168.12.0 to 192.168.12.255 in the
local network.
3
Symbols on the Product
Symbol Explanation
Internet
No function
No function
System LED
COM LED
Ethernet
WEEE designation
Do not dispose of the product together
with the household waste but in accor-
dance with the disposal regulations for
electronic waste applicable at the instal-
lation site.
6
EDMM-20-ISS-xx-10
SMA Solar Technology AG
Symbol Explanation
The product is suitable for indoor instal-
lation.
CE marking
The product complies with the require-
ments of the applicable EU directives.
FCC designation
The product complies with the require-
ments of the applicable FCC standards.
RCM (Regulatory Compliance Mark)
The product complies with the require-
ments of the applicable Australian stan-
dards.
This equipment contains specified radio
equipment that has been certified to the
Technical Regulation Conformity Certifi-
cation under the Radio Law.
ICASA
The product complies with the require-
ments of the South African standards for
telecommunication.
ANATEL
The product complies with the require-
ments of the Brazilian standards for
telecommunication.
Este equipamento opera em caráter se-
cundário, isto é, não tem direito a pro-
teção contra interferência prejudicial,
mesmo de estações do mesmo tipo, e
não pode causar interferência a sis-
temas operando em caráter primário.
The product complies with the Moroccan
safety and EMC requirements for elec-
tronic products.
4
Disposal
The product must be disposed of in accordance with
the locally applicable disposal regulations for waste
electrical and electronic equipment.
Quick Reference Guide