SMA DATA MANAGER M Schnelleinstieg Seite 4

2 Safety
DANGER
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, can
result in property damage.
1.5 Symbols in the Document
Icon Explanation
Information that is important for a specific
topic or goal, but is not safety-relevant
1.6 Additional Information
Additional information is available at www.SMA-
Solar.com.
Title and information content
"PUBLIC CYBER SECURITY - Guide-
lines for a Secure PV System Com-
munication"
"Direct Marketing Interface"
"SMA GRID GUARD 10.0 - Grid
Management Services via Inverter
and System Controller"
"Parameters and Measured Values"
Device-specific overview of all pa-
rameters and measured values and
their setting options
Information about the SMA Mod-
bus registers
"SMA Modbus ®-interface - en-
nexOS"
Information on the SMA Modbus
interface
"SunSpec Modbus ®-interface - en-
nexOS"
Information about the SunSpec
Modbus interface and supported
information models
"SUNNY PORTAL powered by en-
nexOS"
"RS485 Verkabelungsprinzip / Ca-
bling Plan - SMA Data Manager
M"
4 EDMM-20-ISS-xx-10
Title and information content
Answers to frequently asked ques-
tions
User information on the operation
and features of the product
2
2.1 Intended Use
The SMA Data Manager M is a data logger that
acts as a System Manager and a system gateway.
PV system components and PV systems are
integrated into the SMA infrastructure via the
SMA Data Manager M. This includes energy
generators and loads, I/O systems, sensors and
energy meters. The SMA Data Manager M is suited
for systems with a maximum total PV or battery
power of 2.5 MVA. In the process, the SMA Data
Manager M is supporting communication with up to
50 devices such as PV inverters, battery inverters,
energy meters and I/O systems.
The product is designed for indoor use only.
The product conforms with the EU grid connection
conditions according to regulation (EU) 2016/631.
Type of in-
All components must remain within their permitted
formation
operating ranges and their installation requirements
Technical In- at all times.
formation
The products by SMA Solar Technology AG are not
suitable for use in
• Medical devices, in particular products for
Technical in-
formation
• Aircraft, the operation of aircraft, the supply of
Technical In-
formation
• Rail vehicles, the operation and supply of rail
Technical In-
formation
The above list is not exhaustive. Contact us if you
are unsure whether products by SMA Solar
Technology AG are suitable for your application.
Use SMA products only in accordance with the
information provided in the enclosed documentation
Technical In-
and with the locally applicable laws, regulations,
formation
standards and directives. Any other application may
cause personal injury or property damage.
The documentation must be strictly followed.
Deviations from the described actions and the use of
Technical In-
formation materials, tools, and aids other than those specified
by SMA Solar Technology AG are expressly
forbidden.
Alterations to the SMA products, e.g., changes or
modifications, are only permitted with the express
User Manual
written permission of SMA Solar Technology AG.
Unauthorized alterations as well as failure to
Technical In-
observe the documentation will void guarantee and
formation
SMA Solar Technology AG
Safety
supplying life-support systems and machines,
critical airport infrastructure and airport
systems,
vehicles and their critical infrastructure.
Quick Reference Guide
Type of in-
formation
FAQ on prod-
uct page
User informa-
tion on the
user interface