Parkside Performance PPFBSA 12 A1 Originalbetriebsanleitung Seite 42

GB MT
Mounting a polishing disc on the
mandrel
1. Put the centring hole of the pol-
ishing disc (32, 33) on the mandrel
(23).
2. Tighten the polishing disc (32, 33)
on the mandrel (23).
Procedure (Fig. A)
1. Press and hold the spindle lock (4).
2. Loosen the clamping nut (1).
You can release the spindle lock
(4).
3. Assembly: Insert the attachment
tool into the collet chuck (2).
Disassembly: Pull the attachment
tool out of the collet (2).
4. Tighten the clamping nut (1).
Charging the battery
See also the charger instruction
manual.
Notes
• If warm, allow the battery to cool
before charging.
• Do not expose the battery to dir-
ect sunlight for long periods and
do not place it on a radiator (max.
50°C).
Charging the battery
1. Remove the battery (18) from the
device.
2. Push the battery (18) into the char-
ging slot of the battery charger
(20).
3. Connect the battery charger (20) to
a power outlet.
4. After charging, disconnect the bat-
tery charger (20) from the mains.
5. Pull the battery (18) out of the bat-
tery charger (20).
42
Checking the battery
charge level
LEDs
red, orange, green Battery charged
red, orange
red
Operation
Working instructions
• WARNING! Risk of injury! If pos-
sible, use clamps to hold the work-
piece in place. Never hold a small
workpiece in one hand and the
device in the other while using the
device.
• DANGER! Risk of injury! Ensure
that you have sufficient space in
which to work, and that you do not
endanger other people.
• Adjust the guard cover such that
any sparks or detached parts
cannot hit either the user or any
bystanders.
The guard cover must also be po-
sitioned such that the sparks can-
not ignite combustible parts, in-
cluding those in the surroundings.
• The power tool must not be used
with a cutting stand.
• Only switch on the device when
the attachment tool is not touching
the workpiece.
• Excessive pressure reduces the
performance of the power tool and
When the device
is on, the battery
status indicator (7)
displays the bat-
tery charge level.
Meaning
Battery partially
charged
Battery needs to
be charged