ZUMEX Speed Up Benutzerhandbuch Seite 67

Speed S +plus, Speed S +plus All-in-One,
Speed S +plus Tank All-in-One
+ Remove the 1Step Unit (19+).
6
There are two possibilities when cleaning:
• Complete cleaning: once the unit has been removed from the machine, get rid of extra pulp
and peel if there is any washing it with water and if necessary a mild soap. The whole unit is
also dishwasher safe.
• Deep cleaning: all of the components can be removed and can be cleaned individually. Zumex
recommend this type of deep cleaning at least once a week depending on how much usage
the machine gets.
7 +
Remove the Blade holder S +plus (9+) and clean it carefully taking care not to hurt yourself.
+
8
Remove the PulpOut System (42+).
+
9 To clean all of the components of the unit they should be removed and washed individually, this can
be done by hand or in the dishwasher.
Things to remember
Cleaning non-detachable elements. Use a damp cloth with lukewarm water and soap, and then
C
rinse.
Remember that although some parts are similar they must be mounted on different sides.
D
E
Transparent parts and dish-washers: these parts can be washed in the dish-washer, although you
must make sure you use the correct soap, salt and brightener so that the parts remain shiny and
transparent.
In models with tap: Unscrew the tap from the container, separate the button from the body to
F
clean thoroughly. Remove taps as indicated in the sections: SS Tap Up (44U), SS Tap S +plus (44+),
Tank Tap (55) of Assembly and detachment of components according to model.
In models with the Drain&Clean System, Zumex recommends cleaning the inside of the tube with
G
a large brush (Fig. 7.1) at the start of the feeding tube, at least once a week. This process will avoid
any possible blockages.
Feeding tube: Whether or not your machine has the Drain & Clean System, it is advisable to
H
disassemble the turntable from the feeder for complete removal of wax and debris.
I For any area with difficult cleaning Access, we recommend using the brush (Fig. 1) included in the
machine.
67