ZUMEX Speed Up Benutzerhandbuch Seite 49

49
Assembly (Fig. 20.1+ and 20.2+)
a) Place the rollers (42.1+) into the conveyor belt (42.2+).
b) First place the left hand roller into the metal socket on the frame. Then stretch the belt and
place the other roller into the right hand sockets.(Fig. 20.1+).
c) Insert the ribbon cover (42.4+) by first of all guiding the right hand side pivots into the slots
on the frame (42.3+)(Fig. 20.1+). Then rotate the cover until it rests completely on the frame in a
horizontal position and press down until it clips into place.
d) Press down lightly on the sides of the Side Cover (42.5+) and fit it into the holes on the left hand
side of the Frame (Fig. 20.1+). Ensure that the pivots have been inserted completely, and that the
cover can rotate freely. Leave it in the vertical position.
e) Fit the PulpOut System (42+) into the machine (Fig. 20.2+ and 20.3+). To do this, fit the left
roller onto the drive shaft on the left side of the machine. Make sure that the assembly rests and
is inserted into the pivots of the container.
f) Turn the Anti-Splash Cap (42.6+) is in a vertical position. It is possible to remove the PulpOut
System without removing the cover.
Note: The anti-splash cap must be in a horizontal position to assemble the cover.
Disassembly (Fig. 20.3+)
To remove the PulpOut from the machine, pull it up and out. To disassemble the unit, reverse the
steps indicated for its assembly.
See the Cleaning section for the correct maintenance of the Automatic PulpOut System.
See how it is fitted in various models:
Speed S +plus (Fig. 3+).
Speed S +plus All-in-One (Fig. 4+).
Speed S +plus Tank All-in-One (Fig. 5+).
Self Service Tap Up (44U), Self Service Tap S (44+)
+plus
Assembly of the Up Tap (13.1)
Hold the centring device/bottle holder with one hand while turning the nut on the holder with the
other hand to secure it to the spout on the container.
Align the tap with the centring device/bottle holder and insert the button between the arms of
the holder. Hold the tap with one hand while turning the tap fixing nut with the other hand.